View QD15TL0901_4384407.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

QD15TL0901 page 1 /25 quanta display inc . doc no. QD15TL0901 doc. rev. : 04 issue date : 2006/5/22 final quanta display inc. specification rohs compliant approved by customer quanta display inc. ? specification for tft lcd module model no. qd15tl09 rev.:01 www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 2 /25 quanta display inc . these specification sheets are the proprietary pr oduct of quanta display inc. (?qdi?) and include materials protected under copyright of qdi. do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of qdi. the device listed in these technical literature sheets was designed and manufactured for use in oa equipment. in case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobil es, etc.), rescue and security equipment and various safety related equipment which requi re higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. do not use the device for equipment that requi res an extreme level of reliability, such as aerospace applications, telecommunication equi pment (trunk lines), nuclear power control equipment and medical or other equipment for life support. qdi assumes no responsibility for any damage resu lting from the use of the device, which does not comply with the instructions, and the precautions specified in these technical literature sheets. contact and consult with a qdi sales representa tive for any questions about this device. www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 3 /25 quanta display inc . revision history rev. date change content 00 2006/9/1 preliminary specification initiation www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 4 /25 quanta display inc . 1. application this specification applies to a color tft-lcd module, QD15TL0901. 2. overview this module is a color active matrix lcd module incorporating amorphous silicon tft (thin film transistor). it is composed of a color tft-lcd panel; driver ics, control circuit and power supply circuit and a backlight unit. graphics and texts can be displayed on a 1280 3 800 dots panel with 262,144 colors by using lvds (l ow v oltage d ifferential s ignaling) to interface and supplying +3.3v dc supply voltage for tft-lcd panel driving and supply voltage for backlight. the tft-lcd panel used for this module has ver y high aperture ratio. a low-reflection and higher-color-saturation type color filter is also used for this panel. therefore, high- brightness and high-contrast image, which is suitable for the multimedia use, can be obtained by using this module. optimum viewing direction is 6 o'clock. [features] 1) high aperture panel; high-brightness. 2) brilliant and high contrast image. 3) small footprint. 4) rohs compliant (pb contain is less than 1000ppm ) 3. general specifications parameter specifications unit display size 15.4? diagonal inch active area 331.2 207.0 mm pixel format 1280 (h) 800 (v) pixel (1 pixel = r+g+b dots) pixel pitch 0.2588(h) 0.2588 (v) mm pixel configuration r, g, b vertical stripe display mode normally white unit outline dimensions (typ.)*1 344.0 (w) 222.0 (h) 6.5(d) max mm mass 615 max. g surface treatment glare ; hardness 2h; low reflection ( < 2 %) *1.note: excluding backlight cables. outline dimensions are shown in this specification. www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 5 /25 quanta display inc . 4. input terminals 4-1. tft-lcd panel driving cn1 (1 channel, lvds signals ? ns c/ti standard and +3.3v dc power supply) using connector: fi-xb30sl-hf10 ( jae ) / equivalent interface cable pin assignments pin no . symbol function 1 vss ground 2 vdd power supply, 3.3 v (typical) 3 vdd power supply, 3.3 v (typical) 4 v eedid ddc 3.3v power 5 nc reserved for supplier test point 6 clk eedid ddc clock 7 data eedid ddc data 8 rin0- - lvds differential data input (r0-r5, g0) (odd pixels) 9 rin0+ + lvds differential data input (r0-r5, g0) (odd pixels) 10 vss ground 11 rin1- - lvds differential data input (g1-g5, b0-b1) (odd pixels) 12 rin1+ + lvds differential data input (g1-g5, b0-b1) (odd pixels) 13 vss ground 14 rin2- - lvds differential data i nput (b2-b5, hs, vs, de) (odd pixels) 15 rin2+ + lvds differential data i nput (b2-b5, hs, vs, de) (odd pixels) 16 vss ground 17 clkin- - lvds different ial clock input (odd pixels) 18 clkin+ + lvds different ial clock input (odd pixels) 19 vss ground 20 nc no connect 21 nc no connect 22 vss ground 23 nc no connect 24 nc no connect 25 vss ground 26 nc no connect 27 nc no connect 28 vss ground 29 nc no connect 30 nc no connect note 1 relation between lvds signals and act ual data shows below section (4-2). note 2 the shielding case is connected with signal gnd. www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 6 /25 quanta display inc . 4-2 interface block diagram www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 7 /25 quanta display inc . 4-3. backlight driving cn2: bshr-02vs-1 (jst) mating connector: sm02b-bhss-1-tb ( jst ) or 87210-0200 pin no. symbol function 1 blh power supply for lamp (high voltage side) 2 blc power supply for lamp (low voltage side) 5. absolute maximum ratings 5-1 lcd module parameter symbol condition ratings unit remark input voltage v i ta=25 0.3 vdd+0.3 note1 +3.3v supply voltage vdd ta=25 0 4 storage temperature tstg 25 60 note2 operating temperature (ambient) topa 0 50 note3 note1 lvds signals note2 humidity 95%rh max. at ta Q 40 . maximum wet-bulb temperature at 39 or less at ta>40 . no condensation. note3 when you apply the lcd module for oa system. please make sure to keep the temperature of lcd module is less than 60 o c. www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 8 /25 quanta display inc . 6. electrical characteristics 6-1.tft-lcd panel driving ta 25 parameter sym. min. typ. max. unit remark vdd supply voltage vdd +3.0 +3.3 +3.6 note2 current dissipation idd 485ma 545ma note3 permissive input ripple voltage v rp 100 mv p-p vdd=+3.3v differential input high v th +100 mv v cm =+1.2v threshold voltage low v tl ?100 mv note1 terminal resistor r t 100 differential input rush current i rush 1.5 a rise time 470us note1 v cm : common mode voltage of lvds driver. note2 on-off conditions for supply voltage 0.5 t1 Q 10 ms 0 t2 Q 50 ms 0 t3 Q 50 ms 400 ms Q t4 200 ms Q t5 200 ms Q t6 vdd-dip conditions 1) 2.5 v Q vdd 3.0 v td Q 10 ms 2) vdd 2.5 v vdd-dip conditions should also fo llow the on-off conditions for supply voltage ccfl data vdd t1 t2 t3 t4 t5 t6 90% 90% 10% 10% 10% t1 t d v dd 2.5v 3.0v www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 9 /25 quanta display inc . note3 test pattern of current dissipation [full white pattern] vdd=+3.3v [full black pattern] vdd=+3.3v r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b [1 line on/off pattern] vdd=+3.3v [1 dot on/off pattern] vdd=+3.3v r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b [32x32 mosaic pattern] vdd=+3.3v www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 10 /25 quanta display inc . 6-2. backlight driving the backlight system is an edge- lighting type with two ccft (cold cathode fluorescent tube). the characteristics of the lamp are shown in the following table. parameter symbol min. typ. max. unit remark lamp current range i l 3.0 6.0 6.5 marms note1 lamp voltage v l 657 730 803 vrms lamp power consumption p l 4.38w i l= 6.0ma note2 lamp frequency f l 50 55 60 khz note3 kick-off voltage vs 1460 vrms ta=25 1650 vrms ta=0 note4 lamp life time l l 15000 hour note5 i l= 6.0ma note1 lamp current is measured with current meter for high frequency as shown below. note2 calculated value for reference ( i l v l ) note3 lamp frequency may produce interference with horizontal synchronous frequency, and this may cause beat on the display. therefore lamp frequency shall be detached as much as possible from the horizontal synchronous frequency and from the harmonics of horizontal synchronous to avoid interference. note4 the voltage above this value should be a pplied to the lamp for more than 1 second to start-up. otherwise the lamp may not be turned on. note5 lamp life time is defined as the time when either or occurs in the continuous operation under the condition of ta = 25 and i l = 6.0 marms. brightness becomes 50 % of the orig inal value under standard condition. kick-off voltage at ta = 0 exceeds maximum value. note6 the output of the inverter must have symmetrical waveform of voltage and current. the unsymmetric rate should be less than 10%. you don?t use the inverter which has unsymmetrical voltage, unsymme trical current and spike wave. note) the performance of the backlight, fo r example life time or brightness, is much influenced by the characteristics of the dc-ac inverter for the lamp. when you design or order the inverter, please make su re that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occur. when you confirm it, the module should be operated in the same condition as it is installed in your instrument. module 1 2 inverter a i-p ip ( | i p |-| i -p | ) / | i rms | x 100% Q 5% * unsymmetrical ratio: i p ( or i -p ) / i rms Q 2 10% * distortion ratio: www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 11 /25 quanta display inc . 7. timing characteristics of lcd module input signals 7-1. timing characteristics (this is specified at digital outputs of lvds driver.) vertical item symbol min. typ. max. unit remark vsync cycle (t va ) 16.667 ms negative 808 816 850 line blanking period(t vb ) 8 16 line sync pulse width (t vc ) 2 4 35 line back porch (t vd ) 5 8 line sync pulse width + back porch (t vc +t vd ) 7 12 line active display area (t ve ) 800 800 800 line front porch (t vf ) 1 4 line ( horizontal ) item symbol min. typ. max. unit remark hsync cycle (t ha ) 20.44 s negative 1380 1408 1428 clock blanking period (t hb ) 100 128 clock sync pulse width (t hc ) 16 32 clock back porch (t hd ) 68 75 clock sync pulse width + back porch (t hc +t hd ) 84 107 clock active display area (t he ) 1280 1280 1280 clock front porch (t hf ) 16 21 clock clock item min. typ. max. unit remark frequency 67.0 68.9 72 mhz note1 note) in case of lower frequency, the deteriorat ion of display quality, flicker etc., may be occurred. data enab sync www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 12 /25 quanta display inc . 7-2. input data signals and display position on the screen d1, dh1 d2, dh1 d1, dh2 d2, dh2 d3, dh1 d1,dh800 d1280,dh1 d 1280 ,dh800 r g b www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 13 /25 quanta display inc . 8. input signals, basic display colors and gray scale of each color colors & data signal gray scale gray scale r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? brighter gs61 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 ? gs62 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 red gs63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ? brighter gs61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 ? gs62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 green gs63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ? brighter gs61 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 ? gs62 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 blue gs63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 : low level voltage, 1 : high level voltage each basic color can be displayed in 64 gray scal es from 6 bit data signals. according to the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen. basic color gray scale of red gray s cale of green gray scale of blue www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 14 /25 quanta display inc . 9. this is the edid (extended display identifi cation data) data format to support displays as defined in the vesa plug & display. byte byte field name and comments value value (decimal) (hex) (hex) (binary) header 0 0 header 00 0000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 vender/product id / edid version 8 8 eisa manufacturer code=qds 44 01000100 9 9 eisa manufacturer code(compressed ascii) 93 10010011 10 0a product code ( 92 ) lsb 5c 01011100 11 0b product code msb 00 00000000 12 0c id (32bit) serial no (zero if not used) 00 00000000 13 0d id (32bit) serial no (zero if not used) 00 00000000 14 0e id (32bit) serial no (zero if not used) 00 00000000 15 0f id (32bit) serial no (zero if not used) 00 00000000 16 10 week of manufacture (zero if not used) 00 00000000 17 11 year of manufacture ? 1990 (ex. 2005-1990=15) 10 00010000 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 3 03 00000011 display parameter 20 14 video i/p definition = digital i/p 80 10000000 21 15 max h image size (cm) =33cm 21 00100001 22 16 max v image size (cm) =21cm 15 00010101 23 17 display gamma ( 2.2100 ) ?100 78 01111000 24 18 features (no dpms,active off,rgb,timing blk1) 0a 00001010 panel color coordinates 25 19 red/green low bits (rxry/gxgy) 0f 00001111 26 1a blue/white low bits (bxby/wxwy) 20 00100000 27 1b red x rx=0.571 92 10010010 28 1c red y ry=0.325 53 01010011 29 1d green x gx=0.312 4f 01001111 30 1e green y gy=0.554 8d 10001101 www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 15 /25 quanta display inc . 31 1f blue x bx=0.153 27 00100111 32 20 blue y by=0.139 23 00100011 33 21 white x wx=0.313 50 01010000 34 22 white y wy=0.329 54 01010100 established timings 35 23 established timings 1 (00h if not used) 00 00000000 36 24 established timings 2 (00h if not used) 00 00000000 standard timing id 37 25 manufacturer?s timings( 00h if not used) 00 00000000 38 26 standard timing id1 (01h if not used) 01 00000001 39 27 standard timing id1 (01h if not used) 01 00000001 40 28 standard timing id2 (01h if not used) 01 00000001 41 29 standard timing id2 (01h if not used) 01 00000001 42 2a standard timing id3 (01h if not used) 01 00000001 43 2b standard timing id3 (01h if not used) 01 00000001 44 2c standard timing id4 (01h if not used) 01 00000001 45 2d standard timing id4 (01h if not used) 01 00000001 46 2e standard timing id5 (01h if not used) 01 00000001 47 2f standard timing id5 (01h if not used) 01 00000001 48 30 standard timing id6 (01h if not used) 01 00000001 49 31 standard timing id6 (01h if not used) 01 00000001 50 32 standard timing id7 (01h if not used) 01 00000001 51 33 standard timing id7 (01h if not used) 01 00000001 52 34 standard timing id8 (01h if not used) 01 00000001 53 35 standard timing id8 (01h if not used) 01 00000001 timing descriptor #1 54 36 pixel clock(68.9m)/10,000 (lsb) ea 11101010 55 37 pixel clock(68.9m)/10,000 (msb) 1a 00011010 56 38 horizontal active=1280 pixel s (lower 8 bits) 00 00000000 57 39 horizontal blanking=128 pi xels (lower 8bits) 80 10000000 58 3a horizontal active : horizontal blanking (upper 4:4 bits) 50 01010000 59 3b vertical active =800 lines (lower 8bits) 20 00100000 60 3c vertical blanking=16 lines (lower 8bits) 10 00010111 61 3d vertical active : vertical banking (upper 4:4 bits) 30 00110000 62 3e horizontal sync.offset =21 pixels 15 00010101 63 3f horizontal sync.width=32 pixels 20 00100000 64 40 vertical sync. offset: lines sync. width 44 01000100 65 41 horizontal/vertical sync offset/width upper 2 bits 00 00000000 66 42 horizontal image size=331.2mm (lower 8 bits) 4b 01001011 67 43 vertical image size=207mm (lower 8 bits) cf 11001111 www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 16 /25 quanta display inc . 68 44 horizontal : vertical image size (upper 4:4 bits) 10 00010000 69 45 horizontal border (zero for internal lcd) 00 00000000 70 46 vertical border (zero for internal lcd) 00 00000000 71 47 non-interlaced,normal,no stereo,separate sync,h/v pol negatives 18 00011000 timing descriptor #2 manufacturer specified range timing descriptor 72 48 flag 00 00000000 73 49 flag 00 00000000 74 4a flag 00 00000000 75 4b data type tag : descriptor defined by manufacturer 0f 00001111 76 4c flag 00 00000000 77 4d value=hspw min/2 (pixel clks) , 16/2=8=08h 08 00001000 78 4e value=hspw max/2 (pixel clks) , 0 00 00000000 79 4f value=thbp min/2 (pixel clks) , 84/2=42=2ah 2a 00101010 80 50 value=thbp max/2 (pixel clks), 0 00 00000000 81 51 value=vspw min/2 (line pulses), 2/1=1=01h 01 00000001 82 52 value=vspw max/2 (line pulses), 0 00 00010010 83 53 value=tvbp min/2 (line pulses), 7/2=3.5=04h 04 00000100 84 54 value=tvbp max/2 (line pulses),0 00 00000000 85 55 thp min=value*2+ha pixel clks (pixel clks),1380=value*2+1280=>value=50=32h 32 00110010 86 56 thp max=value*2+ha pixel clks (pixel clks), 1428=value*2+1280=>value=74=4ah 4a 01001010 87 57 tvp min=value*2+va lines, 808=value*2+800=>value=4=04h 04 00000100 88 58 tvp max=value*2+va lines, 850=value*2+800=>value=25=19h 19 00011001 89 59 module revision 01 00000001 timing descriptor #3 : ascii string : supplier name 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag : module serial number fe 11111110 94 5e flag 00 00000000 95 5f ascii (q) 51 01010001 96 60 ascii (u) 55 01010101 97 61 ascii (a) 41 01000001 98 62 ascii (n) 4e 01001110 99 63 ascii (t) 54 01010100 100 64 ascii (a) 41 01000001 www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 17 /25 quanta display inc . 101 65 ascii (d) 44 01000100 102 66 ascii (i) 49 01001001 103 67 ascii (s) 53 01010011 104 68 ascii (p) 50 01010000 105 69 ascii (l) 4c 01001100 106 6a ascii (a) 41 01000001 107 6b ascii (y) 59 01011001 timing descriptor #4 ascii string : supplier p/n 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag : module name fe 11111110 112 70 flag 00 00000000 113 71 q 51 01010001 114 72 d 44 01000100 115 73 1 31 00110001 116 74 5 35 00110101 117 75 t 54 01010100 118 76 l 4c 01001100 119 77 0 30 00110000 120 78 9 39 00111001 121 79 product revision (ex :1) 31 00110001 122 7a terminate with ascii code 0ah 0a 00001010 123 7b pad field with ascii code 20h 20 00100000 124 7c pad field with ascii code 20h 20 00100000 125 7d pad field with ascii code 20h 20 00100000 126 7e extension flag 00 00000000 127 7f checksum 4f 01001111 www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 18 /25 quanta display inc . 10. optical characteristics ta=25 , vdd=+3.3v parameter symbol condition min. typ. max. unit remark viewing horizontal left,right cr>10 35 45 deg. note1,4 angle vertical up 10 15 deg. range down 30 35 deg. contrast ratio n =0 300 350 note2,4 rise tr =0 ms note3,4 response time decay td 25 ms chromaticity of wx 0.283 0.313 0.343 note4 white w 0.299 0.329 0.359 chromaticity of red rx ry 0.541 0.295 0.571 0.325 0.601 0.355 chromaticity of green gx gy 0.282 0.524 0.312 0.554 0.342 0.584 chromaticity of blue bx by 0.123 0.109 0.153 0.139 0.183 0.169 luminance of white note4 ? 5 points 250 300 cd/m 2 il = 6.0 marms f l =55khz white uniformity ? 5 points 1.4 note5 the optical characteristics shall be measured in a dark room or equivalent state with the method shown in fig.3. field=2 o photodetector (bm-5a: topcon) 500 mm tft-lcd module lcd panel center of the screen fig 3. optical characteri stics measurement method www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 19 /25 quanta display inc . note1 definitions of viewing angle range: note2 definition of contrast ratio: the contrast ratio is defined as the following. contrast ratio (cr) = note3 definition of response time: the response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white" . note4 this shall be measured at center of the screen. note5 definition of white uniformity: maximun luminance of 5 points w = minimum luminance of 5 points *1) 5 points are a,b,c,d,e *2) 13 points are a~m luminance (brightness) with all pixels white luminance (brightness) with all pixels black normal direction 6 o?clock direction left ri g ht u p down 100% 90% 10% 0% t r t d white black white time photodetector output (relative value) f 10mm 1/4 h 3/4 h 1/2 h 10mm 10mm 1/4 v 3/4 v 1/2 v 10mm g a h d b e i c j k l m www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 20 /25 quanta display inc . 11. display quality the display quality of the color tft-lcd module shall be in compliance with the incoming inspection standard. 12. handling precautions a) be sure to turn off the power supply when inserting or disconnecting the cable. b) be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) since the front polarizer is easily damaged, pay attention not to scratch it. d) wipe off water drop immediately. long contact with water may cause discoloration or spots. e) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. f) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. handle with care. g) since cmos lsi is used in this module, take care of static electricity and injure the human earth when handling. h) observe all other precautionary requirements in handling components. i) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. j) laminated film is attached to the module surface to prevent it from being scratched. peel the film off slowly just before the use with strict attention to electrostatic charges. ionized air shall be blown o ver during the action. blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc.. k) cold cathode fluorescent lamp in lcd pane l contains a small amount of mercury, please follow local ordinance or regulation for disposal. www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 21 /25 quanta display inc . 13. reliability test items no. test item conditions 1 high temperature storage test ta = 60 240h 2 low temperature storage test ta = -25 240h 3 high temperature & high humidity operation test ta = 40 ; 90 %rh 240h ; (as remark #3) (no condensation) 4 high temperature operation test ta = 50 240h (the panel temp. must be less than 60 ) 5 low temperature operation test ta = 0 240h 6 vibration test (non- operating) frequency: 10 500hz, 1.5g, test period : 3 hours (1 hour for each direction of x,y,z) 7 shock test (non- operating) max. gravity: 220 g pulse width: 2ms, half sine wave direction : x, y, z once for each direction. 8 altitude test (operating) 700 mbar / 48 hrs 9 altitude test (non-operating) 260 mbar / 48hrs remark: (1) a failure is defined as the appearance of pixel failured on any color layer or the appearance of horizontal or vertical lines, bars etc. (2) low temperature storage ? panel must retu rn to operating temperature range prior to activation.? (3) hi temperature / humidity test max. wet-bulb temperature is less than 39 o c ; at glass temperature high than 40 o c. temperature and relative humidity range is shown in the figure below. storage range 0 20 40 60 tem p erature ( o c) 80 -60 -40 -20 operating range 20 40 60 80 100 relative humidit y (% rh) www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 22 /25 quanta display inc . 14. others 1) lot no. label: 2) disassembling the module can cause permanent damage and should be strictly avoided. 3) please be careful since image retention may occur when a fixed pattern is displayed for a long time. 4) if any problem occurs in relation to the d escription of this specification, it shall be resolved through discussion with spirit of cooperation. inm1171000001 qd15tl09 rev.01 serial number product name serial number bar code www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 23 /25 quanta display inc . 15. packing form 100 20 carton outline: 454(l) x 384(w) x 335(h) mm total weight: 14.7kg 100 20 ?? step 1 : ?M(s-pwbM)o?, www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 24 /25 quanta display inc . 16. mechanical outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
QD15TL0901 page 25 /25 quanta display inc . www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of QD15TL0901

	To Download QD15TL0901 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .